- Alinco Dr 135 Programming Software Free
- Alinco Dr 135 Programming Software Free Version
- Alinco Dj Md5tgp Programming Software
- Konektor Tuned CRE8900 / Alinco DR 135DX | Simonthewizard
The Alinco DX-10 is a capable, compact, multimode 10 meter transceiver. It will operate in LSB, USB, AM, FM or CW modes. Operation is from 28-29.7 MHz. Power output is adjustable (0-25W SSB and 1-12W FM/AM/CW). This radio does not employ a traditional VFO. Rather, frequencies may be stored in the expansive memory system and then. The accessories shown in the product images within this site such as microphones may differ depending on the version you purchase. The images shown here are usually the standard 'T'(US/Canadian) models. Please contact your local Alinco dealer for details prior to purchase. Product intended for use by properly licensed operators. Information, you may program the radio in VFO mode as follows: 1. Verify the radio is in VFO mode by checking that the memory mode M icon and Channel Number are not visible on the left side of the display. If the radio is in Memory Mode, press and release the V/M key (5) until the M and Channel Number disappear from the display.
Multimode Capabilities
The Alinco DR-135DX covers both the 10 Metre and 11 Metre Bands and can also be programmed to be open to the 12 Metre Band. It is equipped to be used on CW, AM, LSB & USB giving you full access to the complete range of frequencies.
Alinco Dr 135 Programming Software Free
Fully Featured
The Alinco DR-135DX comes with a raft of features including variable Roger Bleep, Noise Blanker, Key lock, Dual Watch mode, scan mode and Display off option. Dials also include an Echo facility and both RF Gain and RF Power controls.
Extra Features
Additional features include a multi colour Frequency Display with an accompanying Channel number display. The Alinco DR-135DX is also equipped with a key tone, Band control, +10Khz step up button as well as a signal meter and integrated SWR Meter. It also has channel controls built into the microphone.
Powerful and Strong
The Alinco DR-135DX is capable of running additional power straight out of the box offering up to 12 Watts on AM, FM & CW and up to 25 Watts on LSB and USB. There is no doubt that this radio can reach far and wide around the world.
Ideal budget choice
When you consider the range of features this radio can offer, the Alinco DR-135DX is one of the most affordable radios on the market when compared to many of the more expensive models available.
Free Accessory Pack
In each box you will receive the DR-135DX along with its hand microphone as well as a user manual plus a dashboard bracket and fixing kit. That’s everything you need to install the Alinco DR-135DX in to your car.
What Customers Say
“Very pleased with this Alnico DX135, great pulling single, great CB and SSB and loads of extras”
– Kenny
“Well worth the price, I also bought the programming lead, once the radio was opened up to all the frequencies it is capable of (25 – 30 mhz) I used the lead to program what I wanted to use.”
– MR K D WILDERSPIN
“First class radio!” – MR P E KING
YouTube Videos
Questions About The Alinco DR-135DX
Does this radio come pre-programmed?
This comes pre-programmed for the 10 meter Amateur Band. It can also be switched to CB mode by pressing button combinations on the front panel at start up. It will then cover the entire CB band. Note, it is not legal to operate this model as a CB in the UK. Also, the channels won’t quite correspond with the UK 40 FM. Additionally, a programming lead is available to make custom changes and program channels to specific requirements.
What frequencies are set in the factory alignment ? What frequencies can be programmed with programming cable?
From 26.065Mhz to 30.000Mhz AM/FM/USB/LSB
What range does this have on SSB?
Hi Ian depending on solar conditions 10 M or 11M. I used standard power which I think was 25w pep on ssb. I max 2000 antenna and made contact to State Side Brazil most of Europe. Dubi. All contacts gave good audio and signal reports back.
Is this radio ready to use in CB mode (UK) straight from the box?
No, but its so simple to unlock, to get UKFM you will need to program via computer
Hi, can you please confirm that this transceiver will work on all UK and EU CB frequencies straight out of the box without any programming needed?
it certainly does although the channel numbers obviously don’t match up so you will need list of the old 27/81 & cept frequencies handy to know where you are .
If you choose to program with software available you then can put which ever frequency to what band you wish so for example band “a” could be 27/81 & band “b” could be cept.
Does this come with the required power supply for indoor use?
Alinco Dr 135 Programming Software Free Version
This comes with wires to connect to a PSU – this does not come with any separate Power supply
Would like to use for cb frequency & marine band… is this possible?
CB frequency is on this radio is approximately 25 mhz to 30 MHZ Marine frequency is vhf not hf 150 Mhz 163 Mhz so to answer your question cb ok marine no
Alinco Dj Md5tgp Programming Software
DR-138/438 Free Utility Software Download
Konektor Tuned CRE8900 / Alinco DR 135DX | Simonthewizard
Please be advised that this is a freeware (copyright reserved by Alinco, Inc), but an optional ERW-7 cable is necessary for operations. Although we have tested this software on our Windows7/10 environments and haven't experienced any serious accident during the operation, we are not responsible of any eventual damage caused to your radio and/or PC system by using this utility. Sorry, please do not contact us for how to use the software, as this is a very simple editor software. The updates will be posted here when available. Please uninstall the older version before you install the latest one in case of update.This software enables you to program frequencies, set parameters and save it in your PC for amateur radio version of DR-138/438. Other land mobile versions can be programmed only by using the dealer programming app. Please consult your dealer for the availability as we don't disclose it to consumers direct DR-138/438 Clone Utility (5.2MB/Ver100) InterfaceAn optional ERW-7 PC connection cable is required. Connect it between an USB port of your PC and the external speaker port on the back of the radio. Before start using ERW-7, be sure to install a VCP driver software available from http://www.ftdichip.com/Drivers/VCP.htmInstallation & Operations
|